Soundwin iPBX
The iPBX combines complete IP-PBX features with standards based SIP for telephony solution that can stand alone or integrate with existing phone systems. iPBX is an embedded system with built-in SIP Proxy Server and NAT router for SOHO user not only provide network function but also provide an IP PBX feature in office.
IP PBX / VoIP Service Features
- Trunk
- Trunk Management: Support SIP Trunk / Gateway Trunk Management
- Support two-stage /one-stage call to Trunk by Trunk Group Configuration
- Multiple Service Providers Lines / SIP Accounts Support (10)
- Simultaneous Trunk Links: 10 concurrent trunk calls
- By adding external FXO analog gateway to use PSTN trunk Line
- By adding external GSM VoIP gateway to use GSM trunk line
- Extension
- Built-in SIP Proxy Server Following RFC-3261
- -Support password authentication using MD5 digest and RFC2833 for DTMF Relay
- -100 extensions registration.
- -Support 30 on-net/off-net concurrent calls
- Configurable Call Routing (Dial Plan)
- Least Cost Routing
- -Call Hunting – Round Robin
- Extensions Status Monitor
- Register Status
- Talking Status
- Call hold / call waiting / 3 way conference
- Forwarding - unconditional / unavailable / busy for Each Extension
- Group based call pick-up
- Call parking
IVR / Auto Attendant
- Configurable IVR prompts (Optional)
- Configurable IVR Menu
- Customized Greeting
- Music on Hold
Voice Mail
- Mail Box Access Control (PIN)
- Multi-lingual (Optional)
- 20 minutes recording time
- MWI notification
- Voice mail to e-mail
Management
- WEB Based Management
- HTTP method for Firmware Upgrade
- Backup / Restore Configuration File
- Record Greeting by IP Phone set
- Auto-provision Server for IP Phone configuration (Optional)
IP PBX / VoIP Service Features
- WEB Based Management
- HTTP method for Firmware Upgrade
- Backup / Restore Configuration File
- Record Greeting by IP Phone set
- Auto-provision Server for IP Phone configuration (Optional)
Protocol Standard
- SIP (RFC 3261)
- SDP (RFC 2327)
- RTP (RFC 1889)
- RTCP (RFC 1889)
- Out-Of-Band DTMF (RFC2833)
General Specification
- AC power : AC100V-240V, DC12V/0.5A,50/60 Hz (iPBX only)
- AC power : AC100V-240V, DC12V/1.5A,50/60 Hz (WiPBX only)
- Temperature: 0°C ~ 40°C (Operation)
- Humidity: up to 90% non-condensing
- Emission: FCC Part 15 Class B, CE Mark
- Dimension : 170 x 100 x 35 mm
- Weight: 200g
System Diagram 
iPBX and Videophone register on same GVSC Server, all of Audio CPE devices register on same iPBX
|